Personal Protective Equipment (Ppe); Specifications; Clipper; Charger And Power Pack - Heiniger Xplorer Mode D'emploi

3.3.2 Animals
CAUTION
Danger of injury by animals!
The noise of the equipment can disturb animals. A kick, an attack or the body weight of
the animal can lead to injuries.
► Only persons who have experience with the animals to be clipped are permitted to clip
the animals.
► Secure the animal sufficiently and calm it before starting work.
► Proceed with caution when working.
► Call in a second person if necessary.
NOTE
Reduced battery service life caused by incorrect use!
The battery's performance can be reduced if the battery is used incorrectly.
► Only use the original charger. Other charging devices can damage the battery.
► Disconnect the charger from the power supply when it is not used for extended peri-
ods.
► Remove the battery from the charger if the charger is not connected to the power
supply.
► Never insert other objects into the opening of the charger or in the battery holder on
the device.
► Replace any no-longer rechargeable batteries as they damage the charger.

3.4 Personal Protective Equipment (PPE)

CAUTION
Danger of injury through incorrect or missing protective equipment!
Personal protective equipment is required when working, in order to minimise the possi-
bility of endangering health.
► Always wear the protective equipment required for the current task when performing
work.
Slip-resistant shoes to protect against slipping on slippery surfaces.
Protective goggles to protect eyes from flying parts.
30

4 Specifications

Subject to changes and improvements in the interest of technical advances.

4.1 Clipper

Handle
Length
Weight with battery
Motor power
Speed
Noise emission
Uncertainty K

4.2 Charger and power pack

Voltage
Max. current consumption
Frequency

4.3 Battery

Type
Voltage
Capacity

4.4 Operating conditions

Ambient temperature range
Maximum relative humidity
Cattle and Horse Clipper Cattle and Horse Clipper
Close-fitting protective clothing with low tensile strength, tight sleeves and no
protruding parts. Their primary purpose is to prevent being caught between
moving machine parts.
Do not wear rings, chains or other jewellery.
Wear work gloves to protect against injury.
The acoustic emission while operating the device is typically 65 dB(A). We
recommend that you always wear ear protection when working with the
device.
Ø 54 mm
280 mm
1.02 kg
}
see specifications plate on the device
65 dB (A) (EN 60745-1:2009)
3 dB (A)
}
see specifications plate on power pack and char-
ger
Li-Ion
10,8 V
see specifications plate on the battery
0 - 40 °C
75 %
31