Proper Use; Safety Principles; Power Connections; Servicing And Checking Requirement - Heiniger Handy Mode D'emploi

Information Symbols
Note
Note, non-compliance with which can lead to operating malfunctions or damage.
Pictorial Note
This symbol, together with its number, refers to the relevant illustration at the end of the
instructions.

2.3 Proper Use

The use to which the machine is intended for is described in Section 1.2.
The following applies to safe operation:
The details at Section 1.3, "Technical Data", count as mandatory operating limits and ratings.
Clipping other animals, in particular dangerous animals such as beasts of prey and the like,
counts as mis-use. This could lead to circumstances dangerous to life and limb.
The appliance is not intended for use by young children or infirm persons. If used with a cord
extension device or portable outlet device, ensure such devices are positioned so as not to be
subjected to splashing or ingress of moisture.

2.4 Safety Principles

2.4.1 Power Connections

Only insert the plug into undamaged sockets. Defective installations can cause an electrical
shock or a short circuit. Outside sockets must be equipped with a fault current breaker (Fl).
Observe the relevant national regulations.
Cleaning and servicing should only be done with the mains plug pulled out.
Never let a machine with its cable plugged in lie around unsupervised. Keep children away
from the working area and store the machine out of their reach.

2.4.2 Servicing and Checking Requirement

Only operate the clipping machine if it is undamaged and in a proper condition. Any defects to
the housing or the electrical cable should be rectified by a repair or service agent.

2.4.3 Noise Emission / Personal Protective Equipment

Wear Ear Protectors!
Typical sound emissions when working are 80.1 dB(A). We recommend that ear protectors
should always be worn when working.
Instruction manual HANDY 5