Adjust Time / User Settings; Configure Your House - Watts BT-CT02 Mode D'emploi

Cloning:
L
The menu allows to transfert a configu-
ration from central 1 to central 2. If you
change the central, you do not have to
reconfigure your system.
Put update.bin file on SD card (Special
software for cloning available on www.
wattswater.eu).
Insert the SD card (load with the clon-
ing sofware) in central 1 and make
an update firmware. Insert the same
SD card in central 2 and launch the
cloning. After the cloning, you need to
reconfigure the Wifi and the langage.

3.3 Configure your house

To delete a
room (zone).
Scroll over rooms.
10

3.2 Adjust time / user settings

Language
Set the time and the date manualy or in
automatically you have to set the time
zone (UTC) and the device is getting the
time from internet (WIFI connection is
needed).
Personalise your screen settings, e.g.
background colour etc.
See "User Settings Menu" in MAIN MENU
section (page 8) for further information.
Create all the rooms and re-name them e.g.:
• room 1 = Kitchen,
• room 2 = Lounge etc,
where the various devices such as thermo-
stats will be placed.
Current room name
To create or
add a room
(zone).
To change current room (zone) name.
2019 / 06 Watts | PPLIMW15428C
ENGLISH
EN