Heating/Cooling Devices Management & Programming - Watts BT-CT02 Mode D'emploi

7. HEATING/COOLING DEVICES MANAGEMENT &
PROGRAMMING
1
in the main screen and after
selecting the room
1 Device type choice (heating/cooling,
lighting, On/Off). These buttons are
only displayed if one device type is
installed in the room (colored if active).
2 Current mode, press on this icon
to enter in the menu where you can
change the current operating mode.
3 Ambient temperature or setting tem-
perature (setpoint) or humidity after
one press on 8.
16
3
2 4
12 11
13
4 Heating/cooling indicator (animated if
demand).
5 Information about the heating/cooling
devices installed in the room
6 Only displayed if the screen is locked.
7 Set the current setpoint (deactivated if
the screen is locked).
8 To display either the ambient or setting
temperature or Humidity in 3.
9 Quick access to the desired room.
10 Pilot wire status.
11 Current room name.
12 Floor temperature if floor regulation.
13 Room changing.
EN
5 6
10
2019 / 06 Watts | PPLIMW15428C
ENGLISH
8 7
9