System Settings: Camera - Abus TVVR35010 Manuel Utilisateur

"DST Settings" Setting
tab
DST Activated when box is checked
From / To Date of DST start / end
Daylight Saving Time Bias: Correc-
DST Bias
tion of the DST to the reference time
"More Set- Setting
tings" tab
Device Name Unique specification of the device
Device Number Used for unique identification when
using remote control
Monitor Bright- Scroll bar (left = darker;
ness right = brighter)
Transparent 1:1, 3:1, 1:3 or Non-transparent –
used for managing the display of the
OSD in front of the background im-
age
Menu Dwell 1 to 30 minutes – regulates how long
Time the menu is shown
Main CVBS Video signal scaling on the MAIN
Scaling monitor
Box checked / not checked
Activate Event Displays a symbol at the bottom-left
Note of the live image when an event oc-
curs

System Settings: Camera

All cameras or signal inputs (see page 3) are displayed in
the "Camera Management" overview.
Name Meaning
Camera No. Signal input
Camera Name Specified camera name
IP Camera Ad- IP address of network cameras
dress
Port Port number of network cameras
Status Connected / Disconnected
1. Select the camera by clicking the corresponding line.
2. Select Set to define a new camera connection.
21
"General" tab Setting
Camera Selection of the camera (only previ-
ously activated cameras can be se-
lected)
No settings possible
Camera Name
No settings possible
Display Cam-
era Name
No settings possible
Display Date
No settings possible
Display Week
No settings possible
Date Format
No settings possible
Time Format
No settings possible
OSD Display
No settings possible
OSD Display
Position
Copy To Selection of whether the settings
should be copied to another camera
(and if so, to which camera)
Record See page 22
Note
If you want to display a name, date or time you
need to make these settings within the IP Camera.
Device menu
37