System Settings; Setting The Camera Output - Abus TVVR35010 Manuel Utilisateur

System Settings

Note
The live view can be set as follows.
Open the main menu, then click on "System Settings"
and then "Display Settings":
Video Output VGA, MAIN
Selects the connection where the
settings should be changed
Mode Various camera layouts
Dwell Time Switching time between the individ-
ual cameras in "Stop Auto-switch"
Camera Order Camera order in the live view
Enable Audio Activates / deactivates audio output
on the video output
Output
Event Output Used to assign a monitor for event
output
Port
Event Dwell Time The period where the event is dis-
played on the assigned monitor (in
seconds)

Setting the camera output

Up to 4 cameras can be set simultaneously in the live
view.
1. Click on "Set".
2. Select the display mode.
•
1 x 1
•
2 x 2 etc. (the overview changes according to
your settings)
3. The camera signal is assigned to the corresponding
image section using the navigation keys.
•
"X" means that this camera is not displayed.
4. Further virtual monitors accessed by pressing
5. Press to go back.
6. Click on OK to accept the settings.
Note
In live view you can scroll through the different vir-
tual monitors by turning the mouse wheel.
Live view
.
21