Operating Elements On The Remote Control; Mouse Operation - Abus TVVR35010 Manuel Utilisateur

System operation

Operating elements on the remote control

Note
Pay attention to the remote control diagram on
page 4.
No. Name
Function
21 DEV:
Assigns the remote control with the device ID
22 Alphanumeric keys:
• Selects the camera (channel) in the live view
• Entry of letters and digits in system fields
A:
23
Changes the entry format (upper / lower case,
symbols, digits)
PLAY:
24
Starts playback
VOIP
25
• Not used
PREV:
26
Changes the screen display in the live view
Navigation keys:
27
During playback:
•
, Sets the speed
•
, Previous / next day
In the live view:
• Selects the camera (channel selection)
In menus:
• Navigation
ESC:
28
• Not used
Not used
29
Not used
30
Zoom +:
31
Zooms in on the image section in PTZ mode
F1:
32
In lists:
• Selects all available options
Zoom -:
33
Zooms out of the image section in PTZ mode
F2:
34
Switches between tabs
IRIS-: In PTZ mode:
35
• Closes the iris
Focus-: In PTZ mode:
36
• Brings the image section into focus
IRIS+: In PTZ mode:
37
• Opens the iris
Focus+: In PTZ mode:
38
• Brings the image section into focus
◄II: Pause / reverse playback
39
: Stops playback
40
14
No. Name
Function
PTZ:
41
Switches on PTZ control
Enter II:
42
• Confirms the selection
• Checks / unchecks the boxes
During playback:
• PLAY/PAUSE
Single play mode:
• Advances by a single frame
MENU:
43
• Calls up the main menu
• Switches the key tones on and off (press and
hold down for 5 seconds)
REC:
44
Opens / starts manual recording
INFO:
45
• Switches to another monitor in the live view
EDIT:
46
General use:
• Activates the text entry; backspace in text
fields
47
POWER:
Switches on/off (hold down for 5 seconds)

Mouse operation

Note
Further descriptions in these operating instruc-
tions are made with the mouse.
The device is suitable for use with a USB mouse.
Connect the mouse to the USB port.
Button Function
Left Single-click:
•
Selection in menu, activation of an entry
field or tab
Double-click:
•
Switches between the screen display of
single and multiple images in the live view
and during playback
Click and drag:
•
In PTZ mode: Camera control
•
Set-up of alarm areas or zones
Right Single-click:
•
Calls up the pop-up menu
Scroll In the live view:
wheel
•
Shows previous / next camera
In menus:
•
Scrolls through the menus