Installation - Intermatic Grasslin talento smartB10 mini Notice D'utilisation

Installation

A
Fig. 4: Installation on a DIN rail and circuit diagram
A Installation on a DIN rail
B 110–230 V 1-channel DIN-rail timer
1. Place the DIN-rail timer on the DIN rail (Fig. 4/A) from above and press it back until it locks into
place.
2. Install the DIN-rail timer in accordance with the circuit diagram (Fig. 4/B) (use wires with a
cross-section between 1 mm² and 2.5 mm²).
24
CH1
M
~
L N 1 2 3
B