Special Displays; Mains Voltage Available; Truma App With Inet Box; Infrared (Ir) Remote Control (Air Conditioning System) - Truma CP Plus Mode D'emploi

Example:
H 1.20.01 -> H = Appliance; 1.20.01
hot
= Version number
Appliance
C = Truma CP plus control panel
C = Truma CP plus control panel
A = Air conditioning system
H = Heater
T = Truma iNet Box
9. Default setting (RESET)
The reset function resets the Truma CP plus control panel
back to the factory setting. This deletes all settings. New-
ly connected appliances are recognised and saved in the
Truma CP plus control panel.
– Switch on the power supply
12 V direct voltage for CP plus control panel and Combi
and 230 V mains voltage for air conditioning systems and
Combi E.
Perform Reset
– Select "RESET" with the rotary push button (8).
– Tap the rotary push button (8).
– "PR SET" appears in the display.
– Tap the rotary push button (8) to confirm.
After confirmation, the Truma CP plus control panel initialis-
es itself.
CI-BUS
hot
"INIT .." appears on the display while this is in progress.

Special displays

230 V

mains voltage available

The icon indicates that 230 V
able at the connected heater and/or air conditioning system.
hot

Truma App with iNet Box

When a command is sent via the Truma APP from a mobile
device, "APP" appears in the display.
Infrared (IR) remote control (air conditioning
system)
When a command is sent via the infrared remote control of
the air conditioning system, "IR" appears in the display.

External control panel (CI-BUS)

When a command is sent via an external control panel with
CI-BUS, "CI" appears in the display.
mains voltage (power) is avail-
EN 33