Aspire Typhon Revvo Set Manuel De L'utilisateur page 55

Using the Device
Settings in TCR Mode
Once you have selected TCR Mode, you can access the "PWR" and "TCR" settings by pressing the "+" and "-"
buttons at the same time. Press the Fire button to choose between these settings. You can now alter the calibration
with the "+" and "-" buttons. You can set the wattage between 1W and 200W in "PWR", while you can access the
fine calibration range between 0.10‰ and 9.99‰ in "TCR". (Note: ‰=×10 ) The settings cannot be adjusted for
-3
TC (NiI/Ti/SS316L).
Settings in CPS Mode
In CPS (Customizable Power Settings), you can finely calibrate the power curve by pressing the "+" and "-" buttons at
the same time. You can adjust the wattage with "+" and "-", use the Fire button to select between 1 and 10 seconds.
Switching between °C and °F
In order to change the unit of temperature from Fahrenheit (F) to Celsius (C), increase the temperature value to
the maximum or minimum level. If you change the set value even further above or below this range, the display will
automatically switch to the other unit.
Rotate the display
The screen rotates automatically to ensure better functionality.
53