Hama RC 45 Mode D'emploi page 5

Flashing display
Constant display
No display
Note – Automatic search
The clock automatically searches for the DCF
signal ve times per day to ensure that the
time is correct. If the search fails, it ends and is
repeated at the next clock hour. The radio symbol
disappears.
• If the clock repeatedly fails to receive a signal,
press the wave button (5) to manually start the
search for the DCF signal. The radio symbol
starts to ash.
• Press the wave button (5) to cancel the search
procedure.
4
Display
Searching for the
DCF signal
Successful –
signal is being received
Error –
signal search ended
Weak signal reception
Note – Manual search
The manual search takes about 7 minutes. If the
search fails, it ends and is repeated at the next
clock hour. The radio symbol disappears.
Note – Summer time
The clock automatically switches to summer time.
Note – Time zone
• The time zone is used if the DCF time signal
is received in a country whose time zone does
not correspond to German time.
• If the time shift is +1 hour, for example, you
need to set the time zone to +1. This will
automatically set the clock forward one hour.
Active