Starting And Operating; Guarantee - HAVER & BOECKER EML 200 Pure Notice D'utilisation

9. Starting and operating

Run / Stop Run / Stop
Coarse Selection Keys Fine
Coarse Fine
Starting the machine
Switch on the machine with the main switch at the backside oft he machine, all indications oft he display
read 0.
Run / Stop
This key starts the machine. The remaining sieving time (Timer) is indicated in the display.
Coarse / Grob
With the key „Run / Stop" in this mode the machine runs automatically with an amplitude of 2.2 mm. The
selection is indicated with "Coarse / Grob".
Selection keys
With this key the sieving time can be regulated in minutes, they are indicated in the display „Timer". The
machine runs continuously with a setting of 0 without automatic stop.
Fine / Fein
With fhe key „Run / Stop" in this mode the machine runs automatically with an amplitude of 0.9 mm. The
selection is indicated in the display „Fine / Fein".

10. Guarantee

All functions of the sieving machine are checked and adjusted before its delivery.
The machine guarantee is for 24 months.
Test sieves are excluded from guarantee!
We are only liable for defects resulting from flaws or faults in material. The guarantee does not apply to
damages caused by transport. Repairs resulting by improper handling or wear due to operation are excluded
from guarantee. The guarantee is void, if interventions such as variations or improper repairs are effected which
are outside our control.
© Copyright 2010 by HAVER & BOECKER Page 19/31