Free Warning Label Replacement - DeWalt DW744 Guide D'utilisation

FIG. 45
P
A8
A9
A7
3. Depress the stem (A7) on the anti- kickback assembly (P) to allow the assembly to slide
from the riving knife slot.
4. Position anti-kickback assembly into the storage hole as shown. While depressing stem
(A7) slide the anti-kickback assembly across the storage slot (A8) and release pin to lock
into place.
5. Loosen the riving knife lock knob (YY, Fig. 6A) (minimum of three turns).
6. Push riving knife lock knob (YY) toward the riving knife as indicated by the yellow arrows
on the knob to disengage riving knife lock pin.
7. Lift and slide the riving knife from saw.
8. The riving knife can be stored on the fastener on the side of the unit. Place the riving
knife center slot over the stud and secure with the lock knob (A9).
Three Year Limited Warranty
D WALT will repair, without charge, any defects due to faulty materials or workmanship
E
for three years from the date of purchase. This warranty does not cover part failure due
to normal wear or tool abuse. For further detail of warranty coverage and warranty repair
information, visit www.dewalt.com or call 1-800-4-D
does not apply to accessories or damage caused where repairs have been made or
attempted by others. This warranty gives you specific legal rights and you may have other
rights which vary in certain states or provinces.
In addition to the warranty, D WALT tools are covered by our:
E
1 YEAR FREE SERVICE
D WALT will maintain the tool and replace worn parts caused by normal use, for free, any
E
time during the first year after purchase.
90 DAY MONEY BACK GUARANTEE
If you are not completely satisfied with the performance of your D
or Nailer for any reason, you can return it within 90 days from the date of purchase with a
receipt for a full refund – no questions asked.
U
M
O
WALT (1-800-433-9258). This warranty
E
WALT Power Tool, Laser,
E
LATIN AMERICA: This warranty does not apply to products sold in Latin America. For
products sold in Latin America, see country specific warranty information contained either
in the packaging, call the local company or see website for warranty information.
FREE WARNING LABEL REPLACEMENT: If your warning labels (Fig. 46) become illegible
or are missing, call 1-800-4-D WALT (1-800-433-9258) for a free replacement.
E
FIG. 46
15