Electrical Requirements - Whirlpool CAE2795FQ Instructions D'installation

Masquer les pouces Voir aussi pour CAE2795FQ:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical supply
n
is required. A time-delay fuse or circuit breaker is recommended.
It is recommended that a separate circuit breaker serving only
this appliance be provided.
This washer is equipped with a power supply cord having
n
a 3 prong grounding plug.
To minimize possible shock hazard, the cord must be plugged
n
into a mating, 3 prong, grounding-type outlet, grounded in
accordance with local codes and ordinances. If a mating outlet
is not available, it is the personal responsibility and obligation
of the customer to have the properly grounded outlet installed
by a qualified electrician.
If codes permit and a separate ground wire is used, it is
n
recommended that a qualified electrician determine that
the ground path is adequate.
Do not ground to a gas pipe.
n
Check with a qualified electrician if you are not sure the
n
washer is properly grounded.
Do not have a fuse in the neutral or ground circuit.
n

ELECTRICAL REQUIREMENTS

7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cae2745fqCae2743bq

Table des Matières