Factory Settings - Helios KWL EC 200 Pro R Manuel D'installation

1.4. Factory Settings

Unit KWL EC 200 Pro has the following factory settings:
Basic fan speed
Maximum fan speed
(CO )-adjustment
2
Basic humidity level
Adjustment intervall
Freezing protection (cell)
Freezing protection hysteresis
Preheating setpoint
Maintenance reminder
Cell bypass
Cascade control
Humidity level (RF level) adjustment
Switchtyp
Supply fan
Extract fan
Note to software reset:
If the KWL-unit is set back via the remote control in the setting menu ”factory settings”
(page 14, section 1.3.8) the above-mentioned data will be transferred with exception of:
(CO )-adjustment
2
Preheating setpoint
= 1
= 8
= 900 ppm CO
2
= value chosen either automatically or manually
= 10 min.
= 3 °C
= 3 °C
= -3 °C (change to +5 °C if you want to enable the function)
= 4 months
= 10 °C
= not active
= automatic
= fireplace switch
= 100 %
= 100 %
= 1000 ppm CO
2
= 5 °C
17
FACTORY SETTINGS