Publicité
YD:DAMPING <number>
YD:SWx <ON|OFF>
<condition> <time> <bank>
<channel>
YD:SWx <ON|OFF> NEVER
YD:SWx
Note 1: If the parameter is omitted, the device will return the current parameter setting.
For example, if you enter YD:TANK, the reply will be YD:TANK 0, where 0 is the current
Device's NMEA 2000 fluid instance value (tank number).
Note 2: If the interval parameter is omitted, the device will return the current interval.
YD:DAMPING 0
YD:DAMPING 15
YD:SW1 ON <20 15 1 28
YD:SW1 OFF >20 3 1 28
YD:SW4 ON ER 3 1 27
YD:SW4 OFF OK 3 1 27
YD:SW3 ON NEVER
YD:SW3 OFF NEVER
YD:SW2
— 33 —
Sets the damping time constant,
in seconds.
Range: integer from 0 to 1200.
(Note 1)
x — rule number, 1 – 4
Refer to section VI.18 for parameter
description and examples.
Without arguments — shows current
ON and OFF rules for the specified
rule number.
Table 1 continued
Publicité
