Publicité
YD:TYPE <number>
YD:TANK <number>
YD:PGN <pgn> <interval>
YD:SENSOR <type>
YD:OHMS_EMPTY <number> YD:OHMS_EMPTY 11.42
YD:OHMS_FULL <number>
YD:CAPACITY <number>
YD:REFERENCE <number>
YD:TYPE 4
YD:TANK 15
YD:PGN 127505 60000
YD:PGN 127505 50
YD:PGN 130314 1000
YD:SENSOR EUR
YD:SENSOR USA
YD:SENSOR JAP
YD:OHMS_FULL 160.6
YD:CAPACITY 378
YD:REFERENCE 5.0
— 31 —
Fluid type, one of the 7 types defined
in NMEA 2000: 0 = DIESEL, 1 =
WATER, 2 = WASTE, 3 = LIVEWELL,
4 = OIL, 5 = SEWAGE, 6 = GASOLINE.
(Note 1)
Set NMEA 2000 fluid instance value
(0 - 15). (Note 1)
Set transmitting interval for PGN
127505 (Fluid Level) or 130314 (Actual
Pressure) in milliseconds. Values from
50 to 60 000 (1 minute) are allowed.
(Note 1)
Set
the
default
resistance values for empty and full
tank. EUR: 10 - 180, USA: 240 - 33,
JAP: 0 - 310 Ohms. (Note 1)
Set the sensor resistance value for an
empty tank in Ohms. Range: from
0.00 to 400.00. (Note 1)
The same as above, but for a full tank.
Set
the
tank
in
liters.
Range:
to 99 999. Setting of 0 sets «Tank
Capacity» data field of PGN 127505
to «Not Available». (Note 1)
Voltage-output
fluid
reference voltage. Range: from 0 to 16.
See Section 1.4. (Note 1)
Table 1 continued
standard
sensor
capacity
from
0
level
sensor
Publicité
