Miele STB 201 Mode D'emploi page 11

,
Always disconnect the vacuum
cleaner from the electrical supply for
maintenance work and for cleaning.
Switch off at the wall socket and
remove the plug.
To remove threads and hairs
^ Cut any threads or hairs that have
become entangled on the brush
roller with a pair of scissors. The cut
pieces will be drawn in by the suction
power of the vacuum cleaner next
time it is used.
For more obstinate tangles or
blockages the roller cover can be
opened. Any large particles drawn in
can then be removed.
^ Loosen the two locking screws with a
small coin, and take off the roller
cover.
^ Remove any dirt in the brush
compartment interior, and from the
roller brush.
^ Put the roller cover back on and
close it.
^ Tighten the locking screws.
G
Cleaning and care
11