Connecting Dvd-Vcr To The Tv Using The S-Video Cable (Dvd Only); Connecting Dvd-Vcr To The Tv Using The Component Video Cable - Samsung DVD-V6700 Manuel D'utilisation

Connecting DVD-VCR to the TV
using the S-Video Cable
You will enjoy high quality images. S-Video
seperates the picture element into black and
white(Y) and colour(C) signals to present
clearer images than regular video input mode.
1
Connect one end of the S-Video cable into
the S-VIDEO output jack on the rear of the
DVD-VCR.
2
Plug the other end of the S-Video cable into
the appropriate input connector on the
sion.
televi
3
Connect one end of the audio cables sup-
plied into the AUDIO LINE output jacks on
the rear of the DVD-VCR.
• Take care to respect the colour coding of
the left and right channels.
4
Plug the other end of the audio cables into the
appropriate input connectors on the televisio
10 - English
n.
3
1
4
2
Connecting DVD-VCR to the TV
using the Component Video Cable
Your TV must support progressive scan input
to allow you to watch component video output.
You will enjoy high quality accurate colour
reproduction images. Component video seper-
ates the picture element into black and
white(Y), blue(Pb), red(Pr) signals to present
most clear and clean images.
1
Connect Component video cables between
the COMPONENT VIDEO OUT jacks on the
rear of the DVD-VCR and COMPONENT
VIDEO IN jacks on the rear of the TV
2
Connect audio cables between the AUDIO
LINE OUT jacks on the rear of the DVD-VCR
and AUDIO IN jacks on the rear of the TV.
• Take care to respect the colour coding of
the left and right channels.
COMPONENT VIDEO OUT
2
COMPONENT VIDEO IN
.
COMPONENT INPUT
1