Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
How to set the rinse aid level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously Delay and
Option until the indicators
and the display is blank.
2. Press Delay.
• The indicators
• The indicator
flash.
• The display shows the current
setting: e.g.
3. Press Delay again and again to
change the setting.
4. Press the on/off button to confirm
the setting.
6.4 Use of rinse aid and multi-
tablets
When you activate the option Multitab,
the rinse aid dispenser continues to
release rinse aid. However you can
7. OPTIONS
and
start to flash
go off.
= level 4.
– The levels of rinse aid are
from 0A to 6A.
– Level 0 = no rinse aid is
released.
Desired options must be
activated every time before
you start a programme. It is
not possible to activate or
deactivate options while a
programme is running.
Not all options are
compatible with each other.
If you have selected non
compatible options, the
appliance will automatically
deactivate one or more of
them. Only the indicators of
the options still active will
stay on.
deactivate the rinse aid dispenser. In this
case the drying results may not be
satisfactory.
With the rinse aid dispenser deactivated,
the rinse aid indicator is always off.
How to deactivate the rinse
,
aid dispenser
The appliance must be in programme
selection mode.
and
1. To enter the user mode, press and
continues to
2. Press Start.
3. Press Start to change the setting.
The rinse aid indicator goes off.
4. Press the on/off button to confirm
7.1 Multitab
Activate this option when you use multi-
tablets that integrate the salt, rinse aid
and detergent functions. They can also
contain other cleaning or rinsing agents.
This option deactivates the release of
salt. The salt indicator does not come on.
With the use of this option the
programme duration is prolonged to
increase the cleaning and drying results
with the use of multi-tablets.
Multitab is not a permanent option and
must be selected at every cycle.
hold simultaneously Delay and
Option until the indicators
and
and the display is blank.
• The indicators
go off.
• The indicator
continues to flash.
• The display shows the current
setting:
= rinse aid dispenser
activated.
= rinse aid dispenser
deactivated.
the setting.
ENGLISH
11
,
start to flash
and
Publicité
Chapitres
Table des Matières
