ROTOR Sanamat RSI Mode D'emploi page 22

© Rotor Lips AG
- Place the appropriate lid on the collecting bowl.
NOTE!
Never turn on the machine unless the lid is in
place. Operating the machine without the lid in
place can be dangerous, because the sieve basket
and the processed product can reach very high
speeds and may possibly wound the operator.
- Close the safety
clasp.
- To turn on the machine, press the appliance switch.
The machine will only operate, when the safety clasp
is closed (safety control).
- Select the most suitable speed control step - 1 or 2
- for the centrifugal basket using the bottom switch.
NOTE!
When abnormal noises turn off the machine and mount
correctly (the right) basket.
- Using the plunger, evenly push the prepared vegetables
and fruit into the feed chute opening. If necessary, first
cut the vegetables and fruit into smaller pieces so that
they pass through the feed chute more easily.
- By noise, empty the residue container, and remove by
hand the residue from the centrifugal basket and the
intermediate ring. Disconnect the mains plug before doing so.
- The residue should not stow, otherwise the machine may
get damaged by strong vibrations.
- Especially very ripe or long stored soft fruits (apples) may
stow the basket. By processing for example too soft
apples, a proper pulp chute is not ensured under these
circumstances. The pulp chute may accumulate in the area
of the lid. In such cases, about by every filling of the pulp
container, the lid must be taken off for cleaning.
20
Instruction Manual
Rotor Sanamat RSI
- Attach a container
for the residue.
Place a recepta-
cle under the
juice outlet.
CH-3661 Uetendorf