Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Tuning in by Adjusting the
Frequency
1
Select the desired band (page 7).
2
Press and hold either side of the SEEK/
AMS/MANU button.
Release the button when the desired station
is received.
SEEK
AMS
MANU
For lower frequencies
PREVENT ACCIDENTS!
When tuning in during driving, use automatic
tuning.
Memorising Stations
EN
Automatically
— Automatic Memory Function
Stations with the clearest reception are
automatically searched and memorized on
each band (FMI, FMII, FMIII, MW and LW).
Up to 6 stations on each band can be stored on
the preset number buttons 1 to 6 in the order of
band frequency.
1
Select the desired band (page 7).
2
A.MEM
Press the
seconds.
The unit will be start scanning the selected
band and memorise the tuned stations on
the preset number button 1 through 6
automatically.
8
— Manual Tuning
SEEK
AMS
MANU
For higher frequencies
button for more than two
Memorising Only the
Desired Stations
1
Select the desired band (page 7).
2
Tune in the station which you wish to
store on a preset number button.
3
Press and hold the desired preset
INTRO
number button (
1
two seconds until you hear a beep tone.
The number of the pressed preset number
button appears in the display window.
Up to 6 stations on each band (FMI, FMII, FMIII, MW
and LW) can be stored on the preset number buttons in the
order of your choice. Therefore, 18 stations can be
memorised on FM.
If you try to store another station on the same preset
number button, the previously stored station will be erased.
Receiving the Memorised
Stations
1
Select the desired band (page 7).
2
Press momentarily the preset number
INTRO
button (
to
1
6
desired station is stored.
Note
If you press the preset number button for more than two
seconds, the currently received station will be memorised.
To receive the previously memorised station, make sure
that the preset number button is pressed only momentarily.
to
) for about
6
) on which the
Publicité
Chapitres
Table des Matières
Dépannage
