Selecting The Spectrum Analyzer; Adjusting The Sound And Frequency Of The Equalizer Preamplifier - Sony XR-M550 Mode D'emploi

1
Press (MENU).
2
Press M or m repeatedly until the desired
item appears.
Each time you press m, the item changes as
follows:
Example
Clock t Beep t RM t English/French/
1
Spanish t D.Info* t SA*
Contrast t M.Dspl t A.Scrl*
1 1
LPF* t Loud*
1
When the radio is off, or when no tape, CD,
*
or MD is playing, this item will not appear.
2 When no CD or MD is playing, this item will
*
not appear.
Note
The displayed item will differ depending on the
source.
Tip
You can easily switch among categories ("Set,"
"Snd," "P/M" (Play Mode) and "Dis") by pressing
an holding M or m for two seconds.
3
Press , to select the desired setting
(Example: on or off) or press < or ,
repeatedly to select the frequency
(Example: off, 78 Hz or 125 Hz).
For the "Contrast" setting, pressing ,
makes the contrast higher, and pressing <
makes the contrast lower.
4
Press (ENTER).
After the mode setting is complete, the
display returns to normal playback mode.
1
t Dimmer t
2 t HPF* 1 t
Selecting the spectrum
analyzer
The sound signal level is displayed on a
spectrum analyzer. You can select a display
pattern from 1 to 6, or the automatic display
mode.
1
Press (SOURCE) to select a source (tuner,
tape, CD, or MD).
2
Press (MENU).
3
Press M or m repeatedly until "SA"
appears.
4
Press < or , repeatedly to select the
desired setting.
B SA 1 b
B SA Auto* b
* All of these display patterns appear one by
one automatically.
5
Press (ENTER).
Adjusting the sound and
frequency of the equalizer
preamplifier
This unit can also control an optional equalizer
preamplifier.
This lets you add some effects to the sound
field of the currently selected source.
For details, refer to the instructions manual
supplied with the equalizer preamplifier.
GB
B ... SA 6 b
B SA off b
19