1
Sound levels switch
2
Transmitter with 1" diameter hollow to insert the microphone.
3
Battery cover
4
Microphone adapter diameter 0.5''
5
Microphone adapter diameter 0.25''
4. INSTRUCTIONS FOR USE
1.
Select the adapter corresponding to the diameter of your microphone (no adapter if
diameter is 1'')
2.
Insert the microphone of the sound level meter in the calibrator until the end.
3.
Power on your sound meter
4.
Select frequency weighting A
5.
Select fast response time
6.
Set the whole unit on a flat and stable area
3. DESCRIPTION
6