Bosch GWS 10,8-76 V-EC Professional Notice Originale page 16

OBJ_BUCH-2534-002.book Page 16 Tuesday, June 28, 2016 3:48 PM
16 | English
 In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek med-
ical help in case of complaints. The vapours can irritate the
respiratory system.
 Use the battery only in conjunction with your Bosch
product. This measure alone protects the battery against
dangerous overload.
 The battery can be damaged by pointed objects such as
nails or screwdrivers or by force applied externally. An
internal short circuit can occur and the battery can burn,
smoke, explode or overheat.
Product Description and Specifica-
tions
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for cutting and roughing of metal,
stone and wood materials, plastics, non-ferrous metals and
tiles without the use of water. A specific protection guard must
be used when cutting.
Product Features
The numbering of the product features refers to the illustration
of the machine on the graphics page.
1 Direction-of-rotation arrow on housing
2 Spindle lock button
3 On/Off switch
4 Battery pack*
5 Battery unlocking button*
6 Battery charge-control indicator
7 Protection guard for grinding
8 Grinder spindle
9 Handle (insulated gripping surface)
10 Protection guard for cutting*
11 Clamping bolt with washer
12 Cutting disc*
13 Hex key
*Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can be
found in our accessories program.
Technical Data
Grinder
Article number
Rated voltage
* depending on the battery pack being used
** Limited performance at temperatures <0 °C
1 609 92A 3B3 | (28.6.16)
Grinder
Rated speed
Grinding disc diameter, max.
Mounting hole diameter
Weight according to EPTA-
Procedure 01:2014
Protection class
Permitted ambient
temperature
– during charging
– during operation
storage
Recommended batteries
Recommended chargers
* depending on the battery pack being used
** Limited performance at temperatures <0 °C
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-3.
Typically the A-weighted noise levels of the product are: Sound
pressure level 75 dB(A); Sound power level 86 dB(A). Uncer-
tainty K =3 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 60745-2-3:
Surface grinding (roughing): a
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working
period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all relevant
provisions of the directives 2011/65/EU, until 19 April 2016:
GWS 10,8-76 V-EC
2004/108/EC, from 20 April 2016 on: 2014/30/EU,
3 601 JF2 ...
2006/42/EC including their amendments and complies with
V= 10.8
the following standards: EN 60745-1, EN 60745-2-3,
EN 50581.
GWS 10,8-76 V-EC
-1
min
mm
mm
kg 0.68 - 0.89*
°C 0...+45
**
and during
°C –20...+50
GBA 10.8V ...
AL 11... CV
(triax vector sum) and uncertainty K
h
2
=13.5 m/s , K=1.5 m/s
h
Bosch Power Tools
19500
76
10
/ II
2