Haussmann Xpert HSMS15A-10-DB Mode D'emploi page 34

GENERAL SAFETY INSTRUCTIONS
the tool, a guard or other part that is damaged
should be carefully checked to determine
if it will operate properly and perform
its intended function.Check for alignment
of moving parts,binding of moving parts,
breakage of parts,mounting, and any other
conditions that may affect its operation.A
guard or other part that is damaged should
be properly repaired or replaced.
20) Direction of feed.Feed workpiece into a
blade or cutter against the direction of rotation
of the blade or cutter only.
21) Never leave the tool running unattended.
Turn power off.Don't leave tool until it
comes to a complete stop.
EN
34