Care And Cleaning; Disposal - Genius Nicer Dicer Fusion Mode D'emploi

7

Care and cleaning

All of the parts of the Nicer Dicer Fusion and the Nicer Slicer should always be washed before initial use and
after each subsequent use with a standard detergent under running water. Although all of the components of
the Nicer Dicer Fusion and the Nicer Slicer can be put in a dishwasher, we recommend you wash them by hand
to maintain their benefits and functions in the long-term.
Self-cleaning function
The Nicer Dicer Fusion has a self-cleaning function for the pin blocks.
GB
Caution!
With the Nicer Slicer in the "unlock" position, the feed plate fixing is released and the entire section of the
device can be removed (e.g. to make cleaning easier). Please note that the stainless steel V blade is then
completely exposed and there is a serious risk of injury.
Note
Although the Nicer Dicer Fusion and the Nicer Slicer can be put in a dishwasher, we recommend washing
them by hand as the high-quality blades may otherwise become blunt over time.

8 Disposal

In the event that the Nicer Dicer Fusion or Nicer Slicer and/or accessories can no longer be used, they should be
disposed of with the household rubbish. They can be disposed of by the municipal waste management services.
16
To clean the integrated pin block, press the "Push" button on the top of
the upper part of the cutting top. The transparent cleaning plate integrated
into the pin block is automatically pushed downwards and cleans the pin
block of even the smallest food residues.
To clean the detachable pin blocks, lift the transparent cleaning plate out
of the pin block by the four protruding supports (there is one support on
each side).
In this way, the cleaning plate will clean the pin block of even the smallest
food residues.