Before First Use; Care And Cleaning - Genius 5827469 Mode D'emploi

„ Only use the product with its original accessories, otherwise you may compromise the product's safety. Danger
of injury!

Before first use

Check the set to ensure that it is complete and no damage has occurred in transit. Details of what is supplied with
the set that you purchased can be found on the packaging or the separate insert sheet.
Remove the packaging material and any stickers attached to the product for protection during transit or for
advertising purposes.
Clean all parts before the first use to remove any production residue (see also "Care and cleaning").
Using
Changing the inserts
„ Remove an insert from the frame by:
•
Turning the frame with the cutting surface in the direction of the work surface
•
Removing the insert from the frame using the lever provided (Fig. A, B, C)
„ Insert the desired insert into the frame by:
•
Sliding the insert with its nose under the metal plate (Fig. D)
•
Pressing the insert firmly into the frame until you hear it click into place (Fig. E)

Care and cleaning

„ Clean the product immediately after use under running water.
„ We recommend cleaning this product by hand to preserve the quality and sharpness of the blades long-term.
„ Leave all parts to dry completely before stowing away.
„ Keep the product out of reach of children.
„ Use a washing-up brush or similar implement to clean the blades.
Disposal
In the event that the product and/or accessories can no longer be used, they should be disposed of with the
household rubbish. It can be disposed of by the municipal waste management services.
If you have any questions about the device or spare parts/accessories, please contact your local retailer.
Instruction manual
GB
7