VOLTCRAFT 12 50 52 Mode D'emploi page 34

6. Press and hold SET button for approx. 3 seconds to exit the settings menu.
fig. 28
g) Factory reset:
1. In case the display of the device malfunctions you may use the RESET (2) button to reset the
device. The clock and power consumption values of the day (from 00:00 to 23:59 o'clock) will be
reset to 0. You will then have to set the clock again.
h) Displaying the forecast
1. In order to display the forecast based on current consumption in fixed intervals you will have to
connect the device to the mains supply. Press and hold the F button for approx. 3 seconds to
enter the forecast mode.
2. Press button to display the forecast calculations for energy consumption, costs and GHG/CO
in fixed intervals.
3. Press SET button to switch between energy consumption in "kWh" and GHG/CO
+ 32).
4. Each time pressing
"DAY" "WEEK"
(fig. 31, 32, 33, 34).
fig. 31
You may also display a forecast based on accumulated values. In order to do so, disconnect the
power consumption meter from the mains supply. Press and hold the F button for approx. 3 seconds
to enter the forecast mode. Follow steps 1. to 4. in order to display accumulated values per day,
week, month or year.
Press and hold F button for approx. 3 seconds to exit the forecast mode.
34
fig. 29
button will change the display as follows:
"MONTH" "YEAR"
fig. 32
fig. 30
fig. 33
in "kg" (fig. 31
2
fig. 34
2