Publicité
AC-81MD only
Do not touch the patient and the pin of the
DC OUT connector at the same time.
The pin of the DC OUT connector applies a
voltage of 24 V, which may harm the
patient.
16
GB
How to Connect the DC Cable
How to Connect the
DC Cable
For the AC-81MD
Note
Before connecting or disconnecting the DC
cable, be sure to unplug the power plug from
the mains outlet.
Insert the DC cable into the DC IN
connector of the medical equipment with its
arrow mark facing upwards.
Make sure that the DC cable is connected
securely until it is locked.
Disconnecting the DC Cable
Hold the DC OUT connector to pull the DC
cable out.
Pull the connector towards
you to release the lock.
Publicité
