Westfalia Automotive SIARR 306329600001 Notice De Montage page 2

SIARR
01 - 78
PREPARATION
* Remove the spare wheel.
ASSEMBLY
* Take out the 2 securing screws from the points marked A (Fig.1)
from each leaf spring shackle mounting bracket.
* Position the tow bar and fasten it to the points marked A using
the original screws.
* Tighten to a torque of 13,5daNm.
* Take out the securing screws from each leaf spring shackle mounting
bracket at B.
* Fit the spacer over the hole provided at B in the tow bar.
* Insert the back plates Y and the two HM14x40 screws and tighten
to a torque of 13,5 daNm.
FASTENING KIT
2 off HM14x140 screws
2 off CS14 washers
X
2 off spacers dia.17/21-L.90
4 back plates
2 off HM16x45 screws
Y
2 off HM16 nuts
2 off DEC16 washers
M16 AC8.8 19,5daNm M12
M16 AC10.9 27,5daNm M10
M12 AC8.8 8,1daNm M10
ASSEMBLY INSTRUCTIONS
TORQUES :
AC10.9 11,4daNm M8 AC8.8
AC8.8 4,7daNm M8 AC10.9
AC10.9 6,7daNm
FILE : BUREAU\NOTICEDEMONTAGE\SIARR\NDMWESTFALIA\NDM0178-B - FOLIO NDM ANG
A
!
Type Type
Approval No.
Tow-bar for
Jumper / Boxer / e11*94/20*00*1078
Ducato
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
306329600001
!
Affix the sticker in the position
Max. Total Max. Total Max. Verti-
Authori. Weight Towable Weight
cal load
3 500 kg 2 000 kg
Value
D
130 kg 12,50 kN