Pin Assignment - WIKA LSD-30 Mode D'emploi

6. Commissioning, operation
Seal
Correct sealing of the process connections with parallel threads at the sealing
face must be made using suitable flat gaskets, sealing rings or WIKA profile

sealings. The sealing of tapered threads (e.g. NPT threads) is made by providing
the thread with additional sealing material such as, for example, PTFE tape (EN
837-2).
For further information on seals see WIKA data sheet AC 09.08 or under www.wika.com.

Pin assignment

Circular connector M12 x 1, 4-pin
Assignment
U+ U - S+
1 3 2
WIKA operating instructions level switch model LSD-30
SP1 SP2
4 2
Circular connector M12 x 1, 5-pin
Assignment
U+ U - S+
1 3 5

GB
SP1 SP2
4 2
17