KLS Martin group Angulus2 Mode D'emploi page 43

Instructions for Use
Angulus2 Angled Screwdriver
Inserting the tool
• Push the tension clip (1) forwards in an axial direction.
Insert the tool into the head until it reaches the stop.
•
Turn the tool in order to make sure that it is fully inserted.
•
• Pull the tension clip (1) completely backwards in the axial direction until it engages.
Tension clips must be able to be closed smoothly. If this is not the case, the product could
be damaged.
Check that the tool is secure by applying axial tension.
•
Revision 04 43