Use Of The Screwholding Device And The Retaining Clip - KLS Martin group Angulus2 Mode D'emploi

Instructions for Use
Angulus2 Angled Screwdriver
5.2.3

Use of the screwholding device and the retaining clip

In the rear position, the screwholding device can be turned 90° to the left or right.
Revision 04
Insert the screwdriver blade.
•
• Pick a screw from the clip magazine by pressing the
blade onto the head of the screw (self-retaining press
fit).
• Push the screwholding device forwards until the screw
is held by the retaining clip
After inserting the first few threads, pull the
•
screwholding device backwards.
Tighten the screw.
•
45