User's Inspection - KLS Martin group Angulus2 Mode D'emploi

Instructions for Use
Angulus2 Angled Screwdriver
Designation
Twist drill 1.5 x 7 mm
Twist drill 1.5 x 9 mm
Twist drill 1.5 x 11 mm
Twist drill 1.5 x 13 mm
Twist drill 1.5 x 15 mm
Twist drill 1.5 x 17 mm
Twist drill 1.9 x 5 mm
Twist drill 1.9 x 7 mm
Twist drill 1.9 x 19 mm
3.2

User's Inspection

Immediately upon receipt, the goods must be checked for completeness and potential
•
damage in transit.
Notice of any such damage must be given immediately.
•
Upon receipt of the products, the original packaging and its seal must be checked for
•
integrity. Packages with a broken seal cannot be taken back.
NOTICE
Each packaging is marked with an item number (REF). Please always indicate this number
and the serial number (SN or EN) or lot designation (LOT) in case of a complaint.
Revision 04
REF
50-996-07-07
50-996-09-07
50-996-11-07
50-996-13-07
50-996-15-07
50-996-17-07
50-997-05-07
50-997-07-07
50-997-19-07
37