Gallagher M1800i Notice D'utilisation page 17

Gallagher 3E2489 M1800i M2800i Energizer User Manual
Adjusti ng the energizer output voltage
a) Press the setup butt on (
butt ons ( < or >) to highlight the quickscan bargraph display (it will start
fl ashing).
b) Press (+ or -) to adjust the output voltage up or down. The output voltage can
be adjusted from 4.5KV to 8KV. The factory default setti ng is 8KV.
c) To exit the setup mode wait 10 seconds or press the setup butt on (
) to enter setup mode and use the navigati on
Controller showing the output voltage being adjusted
).
15