JVC TK-C205 Mode D'emploi page 8

Names and Operations of Parts
Camera Body
Body Surface
View when the dome cover is removed.
1
2
1 Camera Head
For adjusting the angle of the camera,
such as during focusing, etc.
( page 13)
2 [IRIS LEVEL] sensitivity adjustment
knob
For adjusting the iris level of the lens.
By turning this knob, the brightness of
video signals can be adjusted.
To darken image Counterclockwise (L side)
To brighten image Clockwise (H side)
MEMO
Since this unit is mounted with a
•
s m o k e c o v e r a s s t a n d a r d
specification, the video may appear
darker than the video during iris-level
adjustment. To improve, adjust the
iris level to a brighter setting or use
the optional clear cover.
E-6
L H
IRIS
LEVEL
3
Turning direction of level
4
FOCUS ADJ.
OFF ON
OFF ON-AGC
OFF ON-BLC
AUTO MANU
LL INT
PHASE WHT.BAL.
R B
SPOT RESET
CORRECTION
FOR
SERVICE
MONITOR
When turning the level (sensitivity
•
adjustment) too far to the L side, the
sensitivity will increase by the AGC
of the camera and the picture quality
will become rough. For this reason,
always set the AGC switch to "OFF"
when making LEVEL adjustments.
MONITOR terminal (RCA pin)
3
For connecting a monitor when determin-
ing camera angle, etc. (High impedance)
Horizontal LOCK screw
4
When adjusting the camera angles horizontal
rotation, this screw is loosened for adjustment
and tightened to maintain the angle.
5 [FOCUS ADJ. - ON/OFF] focus
adjustment switch
When adjusting the focus during
installation, setting this switch to "ON" will
open the iris.
The subject depth will become closer for
easier focusing.
After focusing, set this switch to "OFF".
(Default setting: OFF)
5
6
FOCUS ADJ.
7
OFF ON
OFF ON-AGC
8
OFF ON-BLC
AUTO MANU
9
LL INT
PHASE WHT.BAL.
10
R B
11
12
RESET
SPOT
CORRECTION
13