Adjusting The Camera Angle - JVC TK-C205 Mode D'emploi

Adjusting the Camera Angle

Horizontal
Lock screw
Tilt lock
screws
50˚
Vertical rotation
Rotation levers
Tilt lock screws
Variable
range 120˚
80˚
Zoom ring
Focus ring
Horizontal rotation
(adjustable range: 120°)
1.
Loosen the horizontal LOCK screw.
2.
Holding the both tilt lock screws, rotate
horizontally.
3.
Tighten the horizontal LOCK screw.
Vertical rotation
(adjustable range: +80°, -50°)
1.
Loosen the tilt lock screws.
2.
Holding the rotation levers, rotate
vertically.
3.
Tighten the tilt lock screws.
Image inclination
(adjustable range: ±15°)
Manipulate the rotation levers to adjust the
inclination of the image.
Adjusting the image size
Adjust the size using the zoom ring.
Adjusting the focus
Adjust using the focus ring.
When adjusting the focus, set the FOCUS
ADJ. switch to "ON". After adjustment is
completed, set the FOCUS ADJ. switch to
"OFF".
When required, the surveillance image
should be adjusted, etc.
E-13