Publicité
Les langues disponibles
Les langues disponibles
Base installation instruction:
PICTURE1
1. Lock rear base and front base together according to PICTURE 1.
2. Put the main body into the assembled base along the locating pole, according
to PICTURE 2.
3. After assembled, put the machine in a suitable place, plug in and operate
according to the IM.
CONTROL PANEL
Control panel
Display panel
ON/OFF
Mode button
Timer button
Sleeping wind
Low,medium,high Fan speed
PICTURE2
Remote control operation panel
Speed button
Swing button
Natural wind
ECO button
OPERATING INSTRUCTION
Note: When plug in first time, the "BiBi" sound alerts means the
fan is correctly connected. When the unit in standby status, only the
"ON/OFF" is available.( sound BiBi when plug in, Press buttons with
sound Bi, power off with sound.
ON/OFF
Only the " " button is available When the unit at standby status. The
fan under working after pressed this button. And the fan work initially
in "LOW" speed, normal mode, no timer & swing functions. LED lights
show accordingly.
The fan will work in the same status with that before it turned off without
shut off, except Timer and Mode function Press
turn off the fan and the fan shift to STAND BY mode with long BI---
sound alters.
SPEED
Press
button to set wind speed, and circulate as the rule of LOW-
MED- HI- LOW.... LED lights show accordingly.
TIMER
No timer status when turning on the fan, timer LED no display.
Press TIMER button to set and circulate as the rule of 1H- 2H- 4H-
8H- no timer- 1H....LED lights show accordingly.
There is no timer and related display show under the initial
conditions. The fan will be under countdown status till to turns off.
60
61
when under working,
Publicité
