Trunking Calls (Analog) - Kenwood NX-220 Mode D'emploi

PLACING A DISPATCH CALL
1 Select the desired zone and group ID using the selector
and the Zone or CH/GID keys.
2 Press and hold the PTT switch.
3 If the "PTT Proceed" tone sounds, communication is
possible; start speaking into the microphone. Release the
PTT switch to receive.
• For best sound quality at the receiving station, hold the
microphone approximately 1.5 inches (3 ~ 4 cm) from your
mouth.
• Your dealer can deactivate the Proceed PTT tone, if necessary.
Ask your dealer for details.
RECEIVING A DISPATCH CALL
1 When a dispatch call is received, the transceiver will
automatically change to the correct group ID and you will
hear the call.
2 Readjust the volume as necessary.
PLACING A TELEPHONE CALL
1 Select the desired zone and group ID using the selector
and the Zone or CH/GID keys.
• Alternatively, you can press the key programmed as [Auto
Telephone] to automatically search for a Telephone Repeater.
2 Press and hold the PTT switch for approximately 1 second
to ensure a connection.
• Confi rm that there is a dial tone after you release the PTT
switch.
3 Place the call, following the instructions for making a DTMF
call, starting on page 22.
20

TRUNKING CALLS (ANALOG)