Kenwood NX-220 Mode D'emploi page 41

CONTROL CHANNEL HUNT
On digital Trunking channels, the transceiver automatically
searches for a control channel.
• While searching for a control channel, the antenna icon will fl ash
(types I and II only) and no signals can be received.
PTT ID
PTT ID is the transceiver unique ID code which is sent each
time the PTT switch is pressed and/or released.
Note: PTT ID can be made only in analog operation.
VOICE ANNUNCIATION
When changing the zone, channel, and/or group, an audio
voice will announce the new zone, channel and group number.
TRANSMIT POWER
Each channel is programmed with either high or low transmit
power. On high transmit power channels, press the key
programmed as [Low Transmit Power] to change the transmit
power to low power (you cannot change low transmit power
channels to use high power).
• The indicator appears while using low transmit power (types I and
II only).
29