Siemens VersiCharge Manuel D'installation page 21

• Disconnect the L1 and L2 conductors on the bottom of the
lug block, and the grounding connection from the ground
bar.
L1 and L2
• The L1 and L2 conductors on the top of the lug block and
• Disconnect and remove strain relief, and entire cord-and-
plug assembly.
• Seal cap should be installed in the bottom fed conductor
opening.
• Mounting
© 2012 Siemens Industry, Inc.
the ground connection leaving the top of the ground bar
should not be disturbed.
- 20 -
Document Number: 813540