Maintenance; Service Life; Declaration Of Conformity - TEUFELBERGER ringLOOP Manuel D'utilisation

– Check of metal components for corrosion and
deformations.
– Check of condition and completeness of end con-
nections, stitching (e.g. no abrasion of sewing
thread), splices (e.g. no slippage), knots.
Again, the following rule applies: If there is only
the slightest doubt, the product needs to be retired
or subjected to testing by a competent person.

8. MAINTENANCE

Repairs may be carried out only by the manufacturer.

9. SERVICE LIFE

Its theoretically possible period of use is up 5 years
from the time when the product is first removed
from the undamaged package (only when used
infrequently (1 week per year) and stored properly
(see Chapter "Transport, Storage and Cleaning")).
The product must be retired no later than after 5
years of use. It is assumed that the product will be
removed from its package upon purchase. We rec-
ommend keeping the sales receipt. The theoretically
possible total lifetime (proper storage prior to first
removal + use) is limited to 8 years from the date
of manufacture.
The actual useful life depends solely on the condi-
tion of the product, which in turn is influenced by
various factors (see below). Extreme influences
may shorten service life to a single use only or to
even less if the equipment is damaged prior to its
first use (e.g. in transport).
Mechanical wear and other influences such as the
impact of sunlight will decrease the life span con-
siderably. Bleached or abraded fibres, discoloration,
and hardened spots are certain indicators that the
product needs to be retired.
It is clearly not possible to offer a general statement
about the product's service life, as such life span
depends on various factors, e.g. UV light, type and
frequency of use, handling, climatic influences such
as ice or snow, environments such as salt, sand,
battery acid etc., heat contamination (above normal
climatic conditions), mechanical deformation and/
or distortion,... (incomplete list!),
In general, the following rule applies: If the user,
maintenance / seRvice LiFe
for whatever reason – however insignificant it may
seem – is uncertain whether or not the product
meets all the necessary criteria, either reject it from
service and render unusable, or place in quarantine
and label in an obvious manner so that it cannot be
used by mistake. Only return to service following
the written authorisation of a competent person.
Withdraw equipment from service if it has been
used to arrest a fall.
10. DECLARATION
OF CONFORMITY
The declaration of conformity can be accessed in the
download area of www.teufelberger.com (category:

declaration of conformity).

7