Technical Data - WAGNER WallPerfect Flexio 990 Mode D'emploi

GB D

26. Technical Data

Max. viscosity:
Interior wall paint
Power source:
Power consumption:
Total (P max)
Pump (P1)
Turbine unit
Atomizing output:
Max. flow rate:
Interior wall paint
Max. operating pressure
Protection Class:
Material hose length:
Weight:
Sound pressure level*:
Sound pressure output*:
Oscillation level*:
* Measured for the turbine unit in accordance with EN 60745
Information about the oscillation level
The specified oscillation level has been measured according to a standard test
procedure and can be used to compare against electric tools.
The oscillation level is also for determining an initial assessment of the vibrational strain.
Attention! The vibration emission value can differ from the specified value when the
electric tool is actually in use, depending on how the electric tool is being used. It is
necessary to specify safety measures to protect the operating personnel. These measures
are based on an estimated shutdown during the actual conditions of use (all parts of the
operating cycle are taken into consideration here, for example periods when the electric
tool is switched off, and, when it is switched on but running without any load).
56 56
Technical Data
4000 mPas
230 V ~ , 50 Hz
680 W
50 W
630 W
200 W
525 ml/min
1.5 MPa (15.0 bar)
I
7.0 m
4.7 kg
76 dB (A); Uncertainty K = 4 dB
89 dB (A); Uncertainty K = 4 dB
< 2.5 m/s²; Uncertainty K = 1.5 m/s²
WallPerfect Flexio 990 WallPerfect Flexio 990