Abbreviations And Terminology; Important Notes; Technical Specifications - Franke 2301 20 23 Notice De Montage Et De Mise En Service

2.

Abbreviations and terminology

TWW
TW
SW
DN
FAR Order No.
EA No.
Conversion
All length specifications in the graphics are in mm.
3.

Important notes

• Installation, commissioning and maintenance are to be performed only by a qualified
technician according to the instructions provided.
• Legal requirements and the technical connection regulations of the local water supply
companies must be complied with.
• Before assembling and installing the equipment, flush the supply pipes in accordance
with DIN 1988!
• Use suitable cleaning agents that are not harmful to the fittings in a proper manner
and rinse with water after use. High-pressure cleaners must not be used for cleaning.
• All rights reserved to make technical alterations.
4.

Technical specifications

Nominal diameter:
Minimum flow pressure:
Calculation flow rate:
Volumetric flow:
Flow time at 38°C:
4
Warm drinking-water
Drinking-water
Width A/F
Nominal diameter in mm
Franke-AQUAROTTER Order No.
European article number
1 mm = 0.03937 inches
1 inch = 25.4 mm
DN 15
1.0 bar
0.20 l/s
0.40 l/s (24 l/min) at 3 bar flow pressure
1 – 50 s adjustable
(with shower head, 0.20 l/s at 3 bar flow pressure)