Other Functions; Adjusting The Sound Characteristics; Muting The Sound - Sony XR-2750 Mode D'emploi

If you cannot tune in a preset
station
Press either side of (SEEK/AMS)
momentarily to search for the station
(automatic tuning).
Scanning stops when a station is received.
Press either side of the button repeatedly
until the desired station is received.
Note
If the automatic tuning stops too frequently, press
(LCL) to lights up "LCL" on the display (local seek mode).
Only the stations with relatively strong signals can be
tuned in.
Tip
If you know the frequency, press and hold either side of
(SEEK/AMS) until the desired station is received (manual
tuning).
EN
6
Actual total number:

Other Functions

Adjusting the sound
characteristics
1
Select the item you want to adjust by
pressing (SEL) repeatedly.
VOL (volume) n BAS (bass) n TRE
(treble) n BAL (balance) n FAD (fader)
2
Adjust the selected item by pressing
either (+) or (–).
Adjust within three seconds after selecting.
(After three seconds the button will again
serve as the volume control button.)

Muting the sound

Press (MUTE).
The "MUTE" indication flashes.
To restore the previous volume level, press
again.
E
Sony XR-2750 ( ,F,S,T,A) 3-859-732-32 (1)