Beko DRYPOINT MDp 10 Instructions De Montage Et De Service page 32

Instructions for installation and operation
Type Spare part
Tipo Pieza de recambio
Type Pièce de rechange
Tipo Peça de reposição
MDp 10 - 17
Filter element
Elemento de filtro
MDp 25 - 55
Élément filtrant
Elemento de filtra-
MDp 65 - 130
Float drain
MDp 10 - 17
Purgador con flo-
MDp 25 - 55
Purgeur à flotteur
Dispositivo de des-
MDp 65 - 130
carga flutuador
32
Illustration
Representación
Représentation
Representação
gem
tador
5.2 Replacement of filter element
The filter element needs to be replaced
once a year. To do this, unscrew the lower
part of the housing, remove the spent fil-
ter element and replace it with a new one.
Hold the upper part of the housing while
unscrewing or screwing on the lower part
of the housing.
Dispose of the spent filter according to the
applicable statutory waste disposal regu-
lations. For instructions, see chapter 6.
Dismantling and disposal, page 32.
6. Dismantling and disposal
When dismantling the
compressed air membrane dryer, the pro-
cess media and the device components
must be disposed of separately.
Dispose of all media and components in a
safe manner and according to the applica-
ble statutory waste disposal regulations.
Spent filter element:
Waste code: 150203
Absorption and filter materials, disposable
wipes and protective clothing – with the
exception of those covered under 150202.
7. Spare parts and accesso-
ries
The following spare parts and accessories
Order No.
are available for the
Número de pedido
Référence
Nº de encomenda
4007268
4010849
4009150
4025537
CAUTION!
Danger to the environment!
DRYPOINT
®
DRYPOINT MDp
®
DRYPOINT MD premium series
®
US-EN
MDp
.