Velleman VTSS230 Mode D'emploi page 5

inflammable products even when they are not in
sight. Only use in properly ventilated rooms.
Incorrect use may cause fire.
Do not touch the shafts, tips, or hot air gun as this
can cause serious burns. Keep the tips and hot air
away from the body, clothes, or other flammable
material. Do not aim the hot air gun at the eyes.
Use gloves and/or heat-resistant tools to pick up
the PCB assembly to prevent burns. Always return
the irons and gun to their stands between uses;
always let the device cool down after use and
before storage.
Place the device on a level, stable, and fire
resistant working surface.
WARNING! - This tool must be placed on its stand
when not in use; do not leave the tool unattended
when switched on.
Do not inhale solder fumes. The vapours that are
released during soldering are harmful. Therefore,
you shall only use the soldering station in well-
ventilated areas or under an exhaust hood (solder
fume extractor). Dispose of fume filters and solder
residue in accordance with local regulations.
Use the soldering iron on a heatproof
•
workbench.
Place the soldering iron in its holder after use.
•
Let a hot soldering iron cool down naturally and
•
do not immerse in water.
V. 04 – 29/01/2021
VTSS230
5 ©Velleman nv