Operation; Standby - Husqvarna HTC 270 EG Manuel De L'opérateur

Usage
5. Connect a water hose to the intended connection and turn on the desired water
flow, see Figure 4-7, page 22.
Figure 4-7. Connecting water
Warning!
The grinding head must not be loaded with any other weights in addition to the
intended extra weights. Do not under any circumstances stand on the grinding
head. Too high a loading can cause the grinding head to fail.
4.8

Operation

The machine's functions can be controlled using the control panel - see section
Description of controls – Control panel, page 11.
During operation, the operator pushes the grinder forwards over the floor surface.
4.8.1

Standby

To activate the machine's functions, turn the Power knob to "I". Once the knob set to
this position, the Power indicator on the control panel lights up, indicating that the
machine is in standby mode.
22
HTC 270 EG
2.0