Bentel Security Absolute Guide Rapide De L'utilisateur page 10

Table des Matières

Publicité

10
ITALIANO
Barriere ad Infrarossi
Sono costituite da un dispositi-
vo che emette dei raggi infra-
rossi
(invisibili) e
dispositivo che li riceve. L'in-
trusione è segnalata quando
viene interrotto uno di questi
raggi.
Contatti per Tapparelle
Sono costituiti da un filo che è
fissato sulla stecca più bassa
delle tapparelle e avvolto su
un rocchetto, che è fissato nel
cassettone. L'intrusione è se-
gnalata quando si cerca di
sollevare la tapparella.
Contatti Magnetici per Por-
te e Finestre
Sono costituiti da un contatto
fissato al telaio della porta o
della finestra, tenuto chiuso da
un magnete fissato sulla porta
o la finestra. L'intrusione è se-
gnalata quando si apre la
porta o la finestra.
Dispositivi di Rilevazione
Volumetrici
Rilevano l'intruso quando è
già entrato nell'ambiente che
sorvegliano per cui NON pos-
sono essere attivi quando
l'ambiente è occupato.
Rilevatori di Movimento
Rilevano il movimento negli
ambienti nei quali sono instal-
lati. In base al principio che
sfruttano si distinguono in Ri-
levatori ad Infrarossi, in grado
di rilevare il movimento di cor-
pi caldi, Rilevatori a Microon-
de che sono insensibili alle
variazioni di temperatura e Ri-
levatori a Doppia Tecnologia,
che combinano i due principi.
IL SISTEMA DI SICUREZZA
ENGLISH
Infrared Barriers
These consist of a device that
emits infrared (invisible) rays
da
un
and a device that receives
them. An intrusion is signalled
whenever one of these rays is
interrupted.
Roller Blind Contacts
These consist of a wire placed
on the lowest slat of the shut-
ters and wrapped on a spool
placed inside the frame. An
intrusion is signalled when-
ever someone attempts to lift
the shutter.
Magnetic Contacts for
Doors and Windows
These consist of a contact
fixed to the frame of the door
or window, which is kept
closed by a magnet attached
to the door or window. An in-
trusion is signalled whenever
the door or window is opened.
Volumetric Detection De-
vices
These detect an intruder when
he or she has already entered
into the supervised area, for
which reason they CANNOT be
active when the area is occupied.
Motion Detectors
These detect movement in the
areas in which they are in-
stalled. Based on the detec-
tion technique they use, they
are subdivided into Infrared
Detectors, which can detect
movement by warm bodies,
Microwave Detectors, which
are not sensitive to tempera-
ture
variations,
Technology Detectors, which
combine the two techniques.
THE SECURITY SYSTEM
and
Dual

Publicité

Table des Matières
loading

Table des Matières